[MW:34050] Moderator's spam report for materials-welding@googlegroups.com

This message is being sent to you because you are a moderator of the group materials-welding.

The following suspicious messages were sent to your group, but are being held in your moderation queue because they are classified as likely spam messages.

If you take no action, all the messages below will be discarded automatically as spam.

However, if you see any messages that are not spam below, you may approve them individually by going to:

https://groups.google.com/group/materials-welding/pendmsg

Please do not mark this notification as spam; this is a service for group moderators. If you do not wish to receive these notifications in the future, you may change your preferences by going to:

https://groups.google.com/group/materials-welding/manage_post


------- 1 of 1 -------
Subject: Re: [MW:34022] Abridged summary of materials-welding@googlegroups.com - 3 updates in 2 topics
From: Vishwas Keskar Welding Manager WELDING <vvkeskar123@gmail.com>
Date: Mar 01 07:44PM -0800

Hardness testing - The ball sizes/ tips are as per respective Standard (
HRB/BHN/HV).
Normally contamination due to Hardness testing is not a concerned as this
is a very small area.
If contamination is a real concerned, local pickling

Approve: https://groups.google.com/group/materials-welding/pendmsg?view=full&pending_id=5271140736529370141


For more information about this message, please visit:
https://support.google.com/groups/answer/2466386