Thursday, July 27, 2017

Re: [MW:26690] Hydrotest Pressure difference in Higher points caluclation

DearsP= ρ.g.H


 ρ = test fluid density ( 1000 kg / m3 for water )
g = gravity ( 9.8 )

regards
 
SALHI Raouf
QA/QC Engineer

Tel: Morocco +212628979891
      Tunisia +21621458258


Le Jeudi 27 juillet 2017 4h39, ks sakhileshmon <kssakhilesh@gmail.com> a écrit :


Dear sir,

Can I know the details of "ρ" in this equation  P= ρ.g.H

On Wed, Jul 26, 2017 at 11:12 PM, 'raouf salhi' via Materials & Welding <materials-welding@googlegroups.com> wrote:
Dear chandra ,

To calculate pressure difference between two points with difefrent level we have this formula :

P= ρ.g.H


Le Mercredi 26 juillet 2017 14h15, Chandra Bhanu Mohapatra <bapunchandra@gmail.com> a écrit :



Dear Experts
                      Anybody kindly provide any guidelines or formulas for pressure loss calculation during hydrotest against the elevation (from 0 elevation to any height )
--
tHanks & rEgards
Chandra Bhanu Mohapatra

--
https://materials-welding. blogspot.com/
https://www.linkedin.com/ groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@ googlegroups.com.
Visit this group at https://groups.google.com/ group/materials-welding.
For more options, visit https://groups.google.com/d/ optout.


--
https://materials-welding. blogspot.com/
https://www.linkedin.com/ groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@ googlegroups.com.
Visit this group at https://groups.google.com/ group/materials-welding.
For more options, visit https://groups.google.com/d/ optout.



--
Thanks & Regards.
SAKHILESHMON K S
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.


No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...