Dear Experts,
I have a query and need your advice.
How much allowable tolerance of pipe straightness/vertically while
installing pre-assembled pipe spools and fit-up for field joints?
Presently, we have received prefabricated spools and those having a
vertical deflection of 12mm in 1222mm length.
The material is SS347H --> Pipe --> 6-inch dia --> 14.01mm thickness.
Field joint fit-up is achieved with zero mismatches (as shown in
attached photo).
According to ASME B31.3, para 335.1.1(a), piping distortion, There is
no specific tolerance limit given for alignment piping
distortion/deflection.
If you have any data/reference from CODE for allowable tolerance of
piping straightness/vertically/deflection, kindly share.
--
Thanks,
Dharmesh
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
Subscribe to:
Post Comments (Atom)
Re: [MW:35289] Welding consumable for S355J2WP material
S355 J2 WP is a weathering structural steel It has better atmospheric corrosion resistance. Use E 8018 - W1/W2 Electrodes This is regular...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment