Dear sir,
Normally, which type of cold insulation has to used, is decided/ told by design department i.e. it is mentioned in specification, as it depends on many factors like density, applications temp. etc.
Now, PUF polyurethane foam can the used.
Regards
Prasad rode
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
Subscribe to:
Post Comments (Atom)
Re: [MW:35289] Welding consumable for S355J2WP material
S355 J2 WP is a weathering structural steel It has better atmospheric corrosion resistance. Use E 8018 - W1/W2 Electrodes This is regular...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
1 comment:
Dear Friend
In Liquid Oxygen and Nitrogen service normally perlite is used
Thanks
Mansukh Satashiya
| ASNT NDT Level III RT UT MPT PT| Welding Inspector CSWIP 3.1 | Lead Auditor ISO 9001:2008
T +91 7227039190 | WhattsApp 9726371394
E satashiyam@yahoo.co.in;satashiyam@gmail.com
Post a Comment