u may try with solvents like tricloroethane, paint thinner, acetone,etc
--
-- 2011/4/30 <aatkho@gmail.com>
It is case by case, depend on gasket type, because the roughness of contact gasket surface will be smooth.
Check also client requirement for gasket contact surface.
Anyway, better you ask to paint maker how to clean such type of paint.
Thank you
Sent from my Hape Buluk®
powered by Sinyal Lieur INDOSAT
-----Original Message-----
From: Adi <adinraos@gmail.com>
Sender: materials-welding@googlegroups.com
Date: Sat, 30 Apr 2011 05:27:07
To: Materials & Welding<materials-welding@googlegroups.com>
Reply-To: materials-welding@googlegroups.com
Subject: [MW:10894] Paint repair procedure
Hi all....
Mistakenly flange serration area painted,
Is anybody having repair procedure for this? It is acceptable to
remove painted flange serration area by wire brush.
Adi
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
regards,
Harish.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment