Romeo,
What’s the design code, what’s the materials of construction, piping thickness involved, is there any other client or service specific requirements?
I strongly feel the above details or anything more you have would be essential in selection of welding process/consumables.
Appreciate your reply.
Thanks.
Pradip Goswami,P.Eng.
Welding & Metallurgical Engineer/Specialist
Ontario Power Generation Inc.
Email-pgoswami@sympatico.ca,
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of romio dabre
Sent: Monday, July 19, 2010 1:10 AM
To: materials-welding@googlegroups.com
Subject: [MW:0] Welding of 140 KSI material
Dear All
We need to weld following pipe material
UTS 845/855 Mpa,
T.S. - 990/1000Mpa
Chemical Comp. - 0.35C, 0.65Mn, 0.20Si, 0.95Cr., 0.18Mo
Can anybody advise suitable consumable for this application
Thanks
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
THIS MESSAGE IS ONLY INTENDED FOR THE USE OF THE INTENDED RECIPIENT(S) AND MAY CONTAIN INFORMATION THAT IS PRIVILEGED, PROPRIETARY AND/OR CONFIDENTIAL. If you are not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying, conversion to hard copy or other use of this communication is strictly prohibited. If you are not the intended recipient and have received this message in error, please notify me by return e-mail and delete this message from your system. Ontario Power Generation Inc.
No comments:
Post a Comment