Skip to main content

[MW:874] Info on access to this group on web

By Materials & Welding

http://groups.google.com/group/materials-welding?hl=en

 

For Gmail subscribers

 

Just click the above link and use your Google ID and password if have subscribed with your gmail

 

For Non Gmail subscribers

 

Use your email ID as user name and choose your own password for the first time to register

 

 

You may note the following additional info

 

To subscribe this group, send email to materials-welding-subscribe@googlegroups.com

 

 

To post to this group, send email to materials-welding@googlegroups.com

 

To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com

 

Group’s site @ http://materials-welding.blogspot.com

 

From: Prashant Barodia [mailto:ppbdhatumitra@yahoo.co.in]
Sent: Friday, June 20, 2008 1:02 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:873] RE: 872] Welding Tolerance

 

Dear Sir,

 

any body advise e how to login in this? 

Warm Regards,

Prashant P Barodia

 

Cell No: +919825121539

Dhatu Mitra Engineers,
D-39, Vedashrya Duplex,
Nr. Mother's School,
ISKON Temple road,
Vadodara. 390015.




--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

Comments

Post a Comment

Popular posts from this blog

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

[MW:36169] Cold Bending Qualification

By Materials & Welding
Dear Experts,  Can anyone share the inspection requirements or a qualification procedure for cold bending? Our client spec states only the requirements for induction bending and would like to know your opinion on the cold bend inspection requirements. The code of construction is B31.3, Max. 5D bends, A106 SS 316L.  Thanks in Advance. -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1be61cc3-e9c9-4a5f-834d-e8485e248432n%40googlegroups.com .
Post a Comment
Read more

[MW:30043] Weep hole

By Materials & Welding
If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .
Post a Comment
Read more