Skip to main content

[MW:866] Re: API 5L Material poperties

By Materials & Welding

for mechanical  properties ref: API 5L (2000) line pipe specifications,6.1 and 6.2

 

Babu.P.R

--- On Fri, 6/13/08, asmat ullah <aubajwa@gmail.com> wrote:

From: asmat ullah <aubajwa@gmail.com>
Subject: [MW:861] API 5L Material poperties
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Friday, June 13, 2008, 4:16 AM

Hi friend,  could any body let me know where i can find mechanical properties (other than tensile and yield strength) of API 5L A, B, X42, X52, X60.., .....material?  I am interested in properties like poisson ratio, modulus of elasticity (young's modulus)... etc..  please help  Best Regards, Asmat Ullah          
 --~--~---------~--~----~------------~-------~--~----~
 To post to this group, send email to materials-welding@googlegroups.com  
 To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com  
 For more options, visit this group's bolg at http://materials-welding.blogspot.com/  
 The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. 
 -~----------~----~----~----~------~----~------~--~---
 
 









































Comments








Post a Comment























Popular posts from this blog





















Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint












By


Materials & Welding




















    Introduction     The colour formed when  stainless steel is heated, either in a furnace application or in the heat  affected zone of welds, is dependent on several factors that are related to the  oxidation resistance of the steel. The heat tint or temper colour formed is caused  by the progressive thickening of the surface oxide layer and so, as temperature  is increased, the colours change.   Oxidation  resistance of stainless steels     However,  there are several factors that affect the degree of colour change and so there  is no a single table of colour and temperature that represents all cases. The  colours formed can only be used as an indication of the temperature to which  the steel has been heated.     Factors  affecting the heat tint colours formed     Steel composition     The  chromium content is the most important single factor affecting oxidation  resistance. The higher the chromium, the more heat resistant the steel and so  the development of the heat tint colou...




















Post a Comment









Read more




























[MW:5202] RE: 5200] NDT after PWHT












By


Materials & Welding




















  -------------------------------------   Interpretation:  I‑89‑14   Subject:         Section I (1986 Edition, 1987 Addenda), PW‑11,                    NDE Prior to PWHT   Date Issued:     December 15, 1988   File:            BC88‑393     Question: Does PW‑11 require that NDE be performed on welds after they have been subjected to the postweld heat treatment required by PW‑39?     Reply: No, unless the conditions described in PW‑11.2.2 exist.   ----------------------------------------------   Interpretation:  VIII-1-98-09   Subject:         Section VIII, Division 1 (1995 Edition, 1996 Addenda); NDE                   ...




















Post a Comment









Read more




























Materails FAQs












By


Materials & Welding




















                                                       Q:         What are equivalents for standard Q 235 B (and Q 235 A) for U-channels?         (asked by: boris.vielhaber@vait.com)          A:         DIN Nr. = 2393 T.2, 2394 T.2, EN 10025         W. Nr. DIN 17007 = 1.0038         Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B)                                                                                                     Q:         What is St DIN 2391 BK material?         (asked by: dmcandrews@automaticstamp.com)          A:         Precision steel tubes, cold-finished/hard.                                                                                                     Q:         What is C.D.W. Boiler Tube?         (asked by: montydude123@yahoo.com)          A:         Cold Drawn Welded Boiler Tube.                                                                                                     Q:         WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE         (asked...




















21 comments









Read more