Hi, There is no such specification in ASME Sec.IX. As per ASME Sec.IX mechanical tests only to be conducted for WPS/PQR regardless of Process(es). But most of the companies do RT or UT before doing mechanical tests to confirm that there is no defect.But this is not a Code requirement.
QW-202 Type of Tests Required QW-202.1 Mechanical Tests. The type and number of test specimens that shall be tested to qualify a groove weld procedure are given in QW-451, and shall be removed in a manner similar to that shown in QW-463. If any test specimen required by QW-451 fails to meet the applicable acceptance criteria, the test coupon shall be considered as failed. Thanks & Regards,
(Karthik)
Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282
--- On Fri, 7/15/11, ABHISHEK GHOSH <ghoshabhishekmech@gmail.com> wrote: From: ABHISHEK GHOSH <ghoshabhishekmech@gmail.com> Subject: [MW:11740] PQR testing with RT & UT To: materials-welding@googlegroups.com Date: Friday, July 15, 2011, 10:57 PM
Dear Experts,
Why UT along with RT is performed while qualifying a procedure with FCAW welding, At which clause in ASME 9 it is mentioned that UT & RT both has to be performed ??
With regards.
AG -- ABHISHEK GHOSH FAHAHEEL, KUWAIT MOB: (00)965-65772043 -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment