Wednesday, July 6, 2011

Re: [MW:11602] FCAW using restriction in offshore applications

We areusing this process on offshore piping only need toconvence to client.we are using this process on ss321,A333-Gr6.,P11,P22,A106 & corten steel
 
Mumtaz Ai Khan
 
Works Manager
 
Descon Engineering
 
 
Abu Dhabi
 
Ruwais  
 
009250131684

On Mon, Jul 4, 2011 at 2:57 PM, Elshan Feyzullayev <elshan_f@hotmail.com> wrote:
Hi friends,
 
I would like to find an answer if the FCAW is restriced to use in offshore applications as welding process even if the correct wire is used for to be welded materials?
 
Best regards,
Elshan.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...