So our max deposit thickness in WPS will be -220X1.33 =292.6
We will not consider the thickness we have deposited by smaw process.
We will consider Our PQR test coupon 220 thick.
On Tue, 12 Aug 2025 at 7:03 PM, Saurabh Jain <ensaurabh@gmail.com> wrote:
As per sec IXWithout impact 5mm to 1.33T,With impact 16mm to 1.33TMax deposit thickness also 1.33TRegardsSaurabh JainOn Tue, 12 Aug 2025 at 2:54 PM, pankaj pachahara <pankajpachahara@gmail.com> wrote:Dear Welding Experts,
We have recently completed PQR qualification on a 220 mm thick joint using a combination of SMAW + SAW processes.
Material-SA 5160 GR.70
SMAW deposited thickness: 111 mm(E7018-1)
SAW deposited thickness: 109 mm(EH10K)
I now need to prepare a WPS for the SMAW process only. Could you please clarify up to what thickness this WPS will be qualified for based on the deposited SMAW thickness?
Best Regards
Pankaj
----
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJF_nWOGv24pUQHerd_WTUQJXcrCJSoteFRGkdZwMzwGrgidXQ%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CADr-LL9D4vNmAtf6CUBP9767xF98ZoAO6ymqZ5n-E9m28usG%3DQ%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJF_nWOdErU-MWyHezSWiXDyjufnZKzDGhYTw2fntVb%3DbuiuLg%40mail.gmail.com.
Comments