ERCuNi wire or
ERNiCu-7
Sent from my iPhone
On 4 Mar 2025, at 10:56 PM, sridhar cn <sridharcn305@gmail.com> wrote:
As Chemistry of SB466 C70600 (Copper-Nickel alloy, CuNi10Fe1Mn) isCu- 88 to 90%Ni- 9 to 11%Fe- 1 to 1.8%Mn- up to 1%to weld SB466 C70600 to itself, the recommended filler wire is ERCuNi (Copper-Nickel). This filler metal matchesthe composition of the base material and ensures good corrosion resistance, particularly in marine environments.ERCuNi is specifically designed for welding 90/10 and 70/30 Copper-Nickel alloys and provides excellent mechanicalproperties and compatibility with the base material.Argon or Argon+Helium (for deeper penetration) could be used for shielding.Sridhar.--------------------------------------------------------------------------------------------------------------------------------On Tue, 4 Mar 2025 at 12:23, sujit kumar <sujitkumar19942@gmail.com> wrote:Dear expert,--What filler wire We should use to weld SB466 C70600 to SB466 C70600 material.What parameter should we use to weld that material. Specially when it will get crack??Thanks and regardsSujit
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAFonYWPKiRumE8qRDSg0wX1zAUZFCooUUJpKt8E7nQjqFwhPkw%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAHo%3DYigM_d0_03jcR5ca7jf_T6%2BUoYH4hzR5dYwf8YpW4_0X0g%40mail.gmail.com.
No comments:
Post a Comment