As per your requirement attached, the Welder Performance Record is used to track NDT results, including pass/fail percentages, for each welder based on project specifications. Hopefully this will serve your purpose.
BR,
Deerendra
On Wed, 26 Feb, 2025, 18:25 Midhun, <muralimidhun15@gmail.com> wrote:
Dear Team,Sorry team, I think you have miss understood the question I have asked. Actually, I need a Welder performance record instead of a Welder performance qualification or a welder Continuity record.WELDER PERFORMANCE RECORD is a document which is used to monitor the NDT results pass or fail percentage for each welder as per the project requirement which is even good to keep as a permanent record.--On Wed, Feb 26, 2025 at 2:38 PM Rilley Chellah Mulenga <rilley.mulenga@ahkgroup.com> wrote:QW 451.1 takes about the qualification range limit and the tensile and bend tests requirement , working with a tests coupon of 38mm , is it okey to do root and face bend tests as opposed to side bend tests ?On Wed, 26 Feb 2025 at 11:45, Midhun murali <muralimidhun15@gmail.com> wrote:Dear Experts,Does anyone have welder performance record format. If so, could you kindly share it with me. I would like to use it to monitor welder performance and present the data to the client.BR,Midhun--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/a82f2a5e-2341-4544-8d1f-68b65e65503dn%40googlegroups.com.
--Thanks & kind regards
![EmailLogo]()
T: +260 212 226431 M: +26076123880/ 0964084833 E: Rilley.Mulenga@ahkgroup.com
DISCLAIMER: The information in this Internet e-mail is confidential and may be legally privileged. It is intended solely for the addressee(s).
Access to this Internet e-mail by anyone else is unauthorised.
If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.
All results and data contained in this document are subject to our Standard Terms and Conditions and are valid only when supported by an original document.
Please visit our website at www.ahkgroup.com
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAHkXHT-8pqb8aTmBVeCdhkJaC6_wFK-FNLLx5F-6EiMAVvHbRA%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAM2csOgiGKrA4K%3Dj%2Bm0qyZDVajLMxdC4-NeMSaV_PHjLfO3%2Bsw%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAG0nF9HX%2BwsO%2BMmpGHSX-9pqLA8yYxtk0W%2B%2BQU%3DJfkzgGKdaQA%40mail.gmail.com.
Comments