Tuesday, August 1, 2023

[MW:34455] Aluminum welding

Dear experts

We have to weld 30" dia and 25 mm thickness of aluminum materials .

suggest me alternative of RT, PAUT , joints are confined area

1. Due to space RT is difficult , and for PAUT additional material not available to prepare test pieces / calibration blocks

Best Regards


--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/D4B0725F-CC26-4936-88F3-C9CBDC52D645%40yahoo.com.

No comments:

Re: [MW:35686] HDPE WPS

Refer ASME SEC IX  There is separate chapter for Plastic welding . Based on that you have to prepare  Sent from my iPhone On 21 Jun 2025, at...