Dear Sir,
Wt will be the test temperature and the acceptance criteria to procure the material.
On Fri, 30 Sept 2022, 7:55 am Pravin Kurade, <pravinkurade@gmail.com> wrote:
Yes impact is required ref UG 84 chart--On Fri, 30 Sep 2022 at 09:08, williams p wilson <williamswilsonp@gmail.com> wrote:Dear Experts,Please share the Impact Test requirements of SA 516 Gr.70 N , 80 mm thickness with a MDMT of -29 degree C.Thank You & Regards--Williams P Wilson+968-94600828QA/QC EngineerPlease consider the environment before printing this message
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHBxnQ7-ZGwD2T5SHytyTQndeSpueg2kxmG%3DJg5S6cKHMspPUg%40mail.gmail.com.
Pravinkumar kurade--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAM02rkdw2eJee2Sf1V4KdByc1qRjTegFE1N10DqbgxmwLOnOLA%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHBxnQ586Lpb4syCegm9fd6JfLE4QXKM%2BFVkfeaTxdfghKp2Mw%40mail.gmail.com.
No comments:
Post a Comment