Re: [MW:33506] WPS and PQR

What I understand is :

When we are in high pressure we use T/2 to T+6

When we are in normal pressure we use T/2 to 2T 

Is that right ??  

Le ven. 23 sept. 2022 à 06:15, Kannayeram Gnanapandithan <kgpandithan@gmail.com> a écrit :

As per ASME SEC IX, QW 403.6, Minimum base metal thickness is 11.04mm

THANKS & BEST REGARDS,

KG.PANDITHAN, BE, IWE,  CSWIP 3.1,

ISO 9712 Level 2 in VT,

ASNT-Level II in PT,MT,RT & UT,

LA ISO 9001-2015,

International Welding Engineer. 

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Mon, Jun 13, 2022 at 2:59 PM saleem manhappulath <saleemm9526@gmail.com> wrote:

Dear all

I have PQR Cs to inconel with impact. 

Thinkness 11.07mm

Deposit weld metal thickness: gtaw-6mm smaw -5.07

I need prepare wps for gtaw only

What thickness range will mention for base metal in wps

Regards 

Saleem 

--

Thanks & Best Regards
Saleem manhappulath

Mob:+966533595849
WhatsApp:+919526445936

From iPhone xs

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKH3Omus16kTLJtHK5K7_SZLgZWZTOTV2MdscgWvTiL9Kh%2BW9g%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eNcVD%3DohBOTuQtN%2BdZTs0jEBhhh9hFTF7KgJ4h5exHpZg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANKYR7t-n6OTVnXOZru-acmchGbJPSdKH3ZdACJd4mf-NMBz8w%40mail.gmail.com.