Chris M. Gerold
QA - NDE Specialist
Dairyland Power Cooperative
3200 East Avenue South
La Crosse, WI 54602-0817
Ph: 608/787-1356
Cell: 608/792-1352
Fax: 608/787-1462
email: CMG@dairynet.com
"The significant problems we face cannot be solved by the same level of
thinking that created them." - Albert Einstein
From: Fernando Gameiro <fgameiro@velan.pt>
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Date: 07/01/2010 11:20 AM
Subject: [MW:5814] Hard-facing overlay versus Corrosion resistent overlay
Sent by: materials-welding@googlegroups.com
Dear All,
According to ASME IX the difference between Hard-facing overlay and
Corrosion resistant overlay is limited to the type of tests that is
required on PQR and WPS ?
According to ASME, how to define if certain overlay is a Corrosion
resistant or a Hard-face?
Thanks
Fernando Gameiro
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment