-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Kadam Vijay S.
Sent: January 29, 2009 10:53 AM
To: materials-welding@googlegroups.com
Cc: piping_valves@yahoogroups.com
Subject: [MW:1479] CHLORINE INSTITUTE PAMPHLET 6 CLASS II - Requirement
Dear All,
I have one piping class in LTCS material which is to be used for
CHLORINE GAS service.
With Design condition as follows:
Min 1.84 MPag@ -39 degC
Max 1.38 MPag@ 200 degC
Rating : 150#
For this class our Licensor along with code ASME B31.3 has given
requirement of CHLORINE INSTITUTE PAMPHLET 6 CLASS II.
Dear members can you explain me what exactly is this requirement, and if
its applicable only for valves or also for other fittings.
Thank You & Kind Regards
Vijay Kadam
This e-mail and any attachments may contain confidential and
privileged information. If you are not the intended recipient,
please notify the sender immediately by return e-mail, delete
this e-mail and destroy any copies.
Any dissemination or use of this information by a person other
than the intended recipient is unauthorized and may be illegal.
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
Comments