Skip to main content

[MW:1435] RE: 1434] RE: 1432] Hot Tapping contractors in Abudhabi

Raghu,

The contact you are looking for Hot Tapping is given below.

GASOS (Abu Dhabi)
F. Shaltony
Bin Hamoodah Tower
P.O.Box 203
SH.Khalifa Street
ABU DHABI
UNITED ARAB EMIRATES
Phone: (971) 2 627 66 00
Fax: (971) 2 627 61 50

OR

GASOS (Dubai)
"Gulf Automation Services and Oilfield Supplies"
Nick Dring
c/o GASOS Bin Hamoodah Dubai
P.O.Box 9082
UMM Hureir Rd.
AL Moosa Group Bldg.
1st Floor, Suite NR.104
DUBAI
UNITED ARAB EMIRATES
Phone: (971) 4 337 35 06
Phone:(971) 4 337 32 95
Fax: (971) 4 337 83 53

Thanks & Regards,


Devendra Patel
Senior Buyer
SNC Lavalin Inc.
605 Fifth Ave S.W.
Calgary, Alberta ,Canada T2P 3H5
T: (403) 536-6207, F: (403)536-6018
Email: devendra.patel@snclavalin.com


-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Raju Kolukuluri
(SCMD)
Sent: January 6, 2009 8:43 PM
To: materials-welding@googlegroups.com
Subject: [MW:1434] RE: 1432] Hot Tapping contractors in Abudhabi


Please try with Al Naser work shop or ADOS - Abu dhabi. If they cannot,
at least you can get details where Hot tapping can be done.

Regards,
Raju K.V.P.
Material Quality Assurance Engineer
Commerical Support Services Dept.
Supply Chain Management Division
ADCO, Abu Dhabi, UAE
Tel: +971 2 604 1352 (O) Fax: +971 2 666 0570

-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Raghuram
Bathula
Sent: Tuesday, January 06, 2009 9:05 PM
To: Materials & Welding
Subject: [MW:1432] Hot Tapping contractors in Abudhabi


Can any body provide contact details of Hot tapping contractors in and
around Abudhabi.
capable of providing 16" tapping on a 32" CRG line

is there any technique to provide this branch (hot tapping) w/o
aditional flange?

Thanks in adv.

===========================================================
Disclaimer: The information in this email and in any files Transmitted
with it is intended only for the addressee and may contain confidential
and/or privileged material. Access to this email by anyone other than
the intended recipient is unauthorized. If you receive this in error,
please contact the sender immediately and delete the material from any
computer. If you are not the intended recipient, any disclosure,
copying, distribution or any action taken or omitted to be taken in
reliance on it, is strictly prohibited and Abu Dhabi Company For Onshore
Oil Operations (ADCO) is not responsible for any consequence from such
unauthorized usage. Statement and opinions expressed in this e-mail are
those of the sender, and do not necessarily reflect those of Abu Dhabi
Company For Onshore Oil Operations (ADCO).


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

Comments

Popular posts from this blog

Materails FAQs

Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...

[MW:36169] Cold Bending Qualification

Dear Experts,  Can anyone share the inspection requirements or a qualification procedure for cold bending? Our client spec states only the requirements for induction bending and would like to know your opinion on the cold bend inspection requirements. The code of construction is B31.3, Max. 5D bends, A106 SS 316L.  Thanks in Advance. -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1be61cc3-e9c9-4a5f-834d-e8485e248432n%40googlegroups.com .

[MW:30043] Weep hole

If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .