[MW:1463] RE: 1462] Flange dimensions for size above 12" rating 2500#

Dear Vinayak,

If you want to use the 2500# flange above 12" size, probably you need to
design the flange as non standard flange per Appendix -2 of ASME SEC
VIII Div.1 or as per the applicable code.

Regards

Somesh

-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Nivendkar
Vinayak (Mumbai - Piping)
Sent: January 19, 2009 2:27 PM
To: materials-welding@googlegroups.com; piping_valves@yahoogroups.com
Subject: [MW:1462] Flange dimensions for size above 12" rating 2500#

Dear all,

As per ASME B 16.5 , for 2500# rating max. flange size available is upto
12". If i want to use sizes above 12" for 2500# which will be the most
appropriate standards for dimensional details.

members are requested to advice.

Regards,
Vinayak Nivendkar

This e-mail, including any attached files, may contain confidential and privileged information for the sole use of the intended recipient. Any review, use, distribution, or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive information for the intended recipient), please contact the sender by reply e-mail and delete all copies of this message.

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---