Re: [MW:34012] Simulations PWHT

In my case client is asking for P9 pipe simulation.

On Sunday, March 28, 2021 at 6:03:39 PM UTC+5:30 Pankaj Kolhe wrote:

Yes this is client requirement,

1+ 2 simulation cycle required.

has client asked for plate , pipe, flanges and fittings?

On Thu, Jan 21, 2021 at 1:53 PM sajeed zaheer <sajee...@gmail.com> wrote:

Hello Everyone,

As per Sec 8 code there is no were written about the simulation PWHT, but in the ARAMCO specification I'm  encountering  with  this simulation PWHT,  Two PWHT cycle to account for future repair.Please clarify my doubt about the simulation PWHT.

Virus-free. www.avast.com

--

https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFycdMz3UY6_LM9Ot8f%3Dj2NBSKU%2B1XnNgmVeWLAhcZDupZVhhw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/cef20e1e-ceb0-48c9-be88-89228cf276a1n%40googlegroups.com.