Wednesday, February 22, 2023

[MW:34027] C5 REQUIREMENT OF THE ELECTRODE AND S3 REQUIREMENT OF THE BARE ELECTRODE

Dear Experts,

What is the requirement of C5 for covered electrodes and the S3 requirement for Bare electrode?




Best regards 
S.K

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c3061604-19c3-4fbf-877d-2fc4c9fe531cn%40googlegroups.com.
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:35346] Cast-iron welding

Any advice for cast iron welding Sent from Yahoo Mail for iPhone

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...