Tolerance allowed
On Tue, Feb 2, 2021 at 7:47 PM Pravin Poornachandran <htcispravin@gmail.com> wrote:
Dear expert,Good day.Recently I performed WPS for ER70S-G for nace requirement project.Based on welding consumable mill certificate as per EN10204 3.1, Ni <1% and these chemical analysis is conducted in authorised laboratory following the method specified in industrial code. It is laborious procedure and accurate.But when we perform PMI, Ni values shows 1.2-1.5, which client is questioning now.I did contacted consumable supplier and they are very certain Ni is less than 1%.Can anyone advice how should I handle this situation.Best regards,Pravin Poornachandran--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADDyn7cJnBBffbUGsDUJKPoFzVRvnQ-yOkMV89Ur_sGJiPcemQ%40mail.gmail.com.
Regards,
Jamie Reyes
J.R. Machine Company, Inc.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJNUtUM%3DXXg2dC3v3o%2BO7Mc85zhZXdMdGrjki85iSdCqgpetyg%40mail.gmail.com.
Comments