This is very tricky welding you can use ER NiCr-3 and ENiCrFe-3 consumables. again it depends on which P45 material you are using. but during welding make sure that dilution of SS side base metal is minimum to avoid micro cracks.
Regards,
VJ
-- On Wed, Nov 30, 2011 at 10:58 AM, Madhu <madhusudan.rout@gmail.com> wrote:
Dear All,
For P45 to P8 material welding, which type consumable
can be use,
For SMAW/GTAW process.
Thanks.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment