Skip to main content

Re: [MW:12245] Material Test Certificate Clarification / EN 10.204:2006 / Urgent Attn

By Materials & Welding
Hi,
Pls.refer the EN10204:2004 (second page) it states that the EN10204 exists in three official version(English,German and French) Hence if it is in a french version it will be as a UNE EN10204 and if in German it will be as a DIN EN10204 as Mr.Pieper pointed out.Please find beow the extraction of BS EN10204
 

EUROPEANS TANDARD EN 10204

October 2004

NORMEE UROPEENNE

EUROPAISCHNEO RM

SupersedeEsN 10204:'1991

Englishv ersion

Metallicp roducts- Typeso f inspectiodno cuments

Produilsm 6tallique-s T ypesd e documentds e contr6te MetallischeE zeugnisse - Arten von Profbescheinrgungen

This European Standard was approved by CEN on I August 2004.

CEN members are bound to comply with the CEN/CENELEC Intemal Regulations which stipulale the conditions for giving lhrs European

Standard lhe status of a nationals tandard without any alte.ation. ljp-toiate lists and bibliographicalr eferences concernrngs uch natona

standards may be obtaanedo n applicationt o the Central Secretadato r to any CEN member

This European Standard exrsls in three offoal versions (English, French, Gernan). A versron in any olhef language made by translatron

under lhe resDonsibililyo f a CEN member rnto its own lanouaoe and nolified to the Central Secretaiat has the same stalus as the ofllcral

CEN members are the naiional standards bodies ofAustria, Belgium, Cyprus, Czech Republic, Denmark. Esionia, Finiand. France

Germany Greece Hungary, lceland, lreland. ltaly. Latvia, Lithuania. Luxembourg. Malta, Netheriands, Norway, Poland Portuga Slovak|a

Slovenra SDain. Sweden. Switzerland and United Kinodom


 
Thanks & Regards,

(Karthik)

Karthikeyan.S
QA/QC Manager
Getabec Energy Co.,Ltd.
379,Moo6,Soi8,Nikhomphatana,
Rayong-21180,
Thailand.
Phone: 0066 38 897035-8 (Off)
Fax: 0066 38 897034
Hand Phone: 0066 892512282


--- On Tue, 8/16/11, Vino Varghese <vinopvarghese@gmail.com> wrote:

From: Vino Varghese <vinopvarghese@gmail.com>
Subject: Re: [MW:12239] Material Test Certificate Clarification / EN 10.204:2006 / Urgent Attn
To: materials-welding@googlegroups.com
Date: Tuesday, August 16, 2011, 7:16 PM

Dear Karthik,
 
Appreciate to see a quick reponse from your end.
 
Do you have this Standard or any comparison chart which states that UNE EN10.204:2006 and EN10204:2004 are same. Please provide.
 
Thanks in advance.
 
Regards
Vino
Doha-Qatar
______________________________________________________________
 


 
On Tue, Aug 16, 2011 at 10:51 AM, s. karthik <karthik14475@gmail.com> wrote:
Hi,
UNE EN10204:2006 is a spanish standard and EN10204:2004 and UNE EN10204:2006 are same.
 
Thanks & Regards,
 
(Karthik)

On Tue, Aug 16, 2011 at 2:12 PM, Vino Varghese <vinopvarghese@gmail.com> wrote:
Dear All,
 
We have recieved Structural Material Certificate, S 355 JR + AR from CELSA Barcelona.
The Certification refers to UNE EN 10.204:2006.
 
I know only Certification of Material as per EN 10204:2004.
 
Can anyone share some detail with regard to UNE EN 10.204:2006.
Whether UNE EN 10.204:2006 is same as EN 10204:2004?
 
Hope to see as usual co-operation from all end.
 
Thanks & Regards
Vino P Varghese
Doha-Qatar
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

Comments

Post a Comment

Popular posts from this blog

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

By Materials & Welding
Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...
Post a Comment
Read more

Re: [MW:10788] ON PLOT PIPING & OFF PLOT PIPING

By Materials & Welding
Piping systems involved for the flow lines and gathering lines from the well head isolation valve to the production facility or processing plant isolation valve are determined as OFF PLOT. ON PLOT defines piping system in the processing plant and production platform. ANSI/ASME B31.4 applies for off plot piping system. B31.4 allows the use of either API 1104 or ASME section IX (as appropriate). However, occasionally, a very small system such as piping within 500 feet of a processing plant (some client also said 400 feet) may be declared B31.3 rather than B31.4. When B31.3 is invoked, only ASME Section IX is used. before you decide which code to use for welding procedure and/or welder qualification for pipe welding, you have to know the design and construction code applicable to the system. Please read far enough into scope and diagram illustrating the application of either B31.3 and B31.4 hope this helps rgds 2011/4/21 pradip kumar sil < pradipsil@gmail.com > Dear all, ...
Post a Comment
Read more