Saturday, November 6, 2021

Re: [MW:32593] Alternative MOC - SA387 + SS.304 cladding to complete SS.304

NO.S.S.304 WILL NOT STAND WITH HEIGHT TEMPERATURE SERVICE 

THANKS AND REGARDS 
SUSHIL GAUR 
M.NO.9530278378 

On Sat, Nov 6, 2021 at 7:19 PM uday prabhu <uday31@gmail.com> wrote:
Dear Experts,

Vessel MOC = SA387 GR F11 CL2 + 3mm SS.304 clading
Max operating Temp = 425 C
Max Pr = 20 bar (g)

Can we replace above moc with SS.304.
Will there be Sensitization issues a this temp ??

Regards,

Uday Prabhu

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/eb883ea1-ba79-407e-a7bc-5197397e0496n%40googlegroups.com.


--

sushil gaur

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAAKVvO_U6ex-Pwdyu3T80HfJVfX29mcZvwrXiL7jOUuo-s7DeQ%40mail.gmail.com.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...