Re: [MW:32615] Re: Which Filler wire to be used in between P43 (Inconel 625) to P8 (A240 310S) by GTAW)

Dear,

ER NiCrMo-3 is suitable to weld 625 to 600/625/825/C-22/B-2 etc., not 310.

Regards,

Arun Padman Manayil

P  Save a tree. Please don't print this e-mail unless you really need to

On Wed, Nov 24, 2021 at 6:19 AM rahmat khan <mkrahmat11730@gmail.com> wrote:

As per my understanding For P43 Filler wire ER NiCrMo-3 is suitable as per chemical and mechanical properties.

On Tuesday, November 23, 2021 at 2:14:21 PM UTC+5:30 rahmat khan wrote:

Dear All,

Please help me with this:

1) which filler wire is to be used for GTAW welding of two dissimilar materials P number that is P43 (Inconel 625) to P8 (A240 310S).

2) For SA 516 Gr 70 22mm thick. Ellipsoidal 2:1 dish end, which heat treatment to be used as per ASME Sec VIII Div I UCS 56 After cold forming of dish end.

Please help me I this?

 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/3e2b21db-9755-4cba-8aca-e91531d1f0f9n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHbaPvJ9FOAOW%3DTz_isdOZcLtikfYDWJQo5mu6_1gVdpLokHng%40mail.gmail.com.