Wednesday, November 10, 2021

[MW:32599] Heat treatment regarding

Dear experts,
Pl clarify the heat treatment requirements for SA106 Gr.B pipe I.D  to be flared and done by hot formed operation  like red hot heating with hammering of die in the pipe id  to get the required dimensions.

Does it require heat treatment?

Also the above said process is good engineering  practice for flaring operation of pipe? 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADuMvPb%3DddCgS030uK6pZaqS5KnVyeHMG41Vp-rZo29%3DzRAT4w%40mail.gmail.com.

No comments:

Re: [MW:35507] WPS for Furnace PWHT

As per ASME B31.3, Clause 331.1.6 (b): Any required PWHT shall be carried out in accordance with the qualified WPS. For furnace PWHT inv...