Re: [MW:32020] Aluminum Bronze (C63000) to carbon steel welding.

impossible from metallurgical point of view

Στις Τρί, 2 Μαρ 2021 στις 5:21 π.μ., ο/η VMSS Siva <aviss2000@gmail.com> έγραψε:

Hi all,

Anybody having experience in Aluminum Bronze - C63000 to carbon steel welding (full penertration fillet weld) if so please share following details.

1. Type of filler wire - GTAW

2. Type of Electrode - SMAW.

3. Interpass temperature, Is it required to maintain interpass temp. With heating coil.

4. Heat input requirements if any. 

5. If no sound weld, what type of defects we can expect. 

6. Other than DP, what other NDT we can use to find defects if any. 

With regards, 

Siva

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALN-m%3DDCubRRK0wvubPbmv_Xr%2BSWUEHHtjMrgdQTaEezy_1Y4w%40mail.gmail.com.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40AwxhLXYsu72c77qEk8dpmMLPtMJvNB%3DZenVFfByn6axQ%40mail.gmail.com.