Re: [MW:30196] Alternative for flattening test of LTCS pipe

Dear Raghuram,

Can we reduce the height. 

On Fri, 1 Nov, 2019, 7:33 AM Chiranjeevi A, <chiranjeevipuvvula@gmail.com> wrote:

Dear Raghuram,

 Can we ignore this test.. Or any other test can u specify in this situation. 

On Fri, 1 Nov, 2019, 7:03 AM Raghuram Bathula, <raghurambathula@gmail.com> wrote:

H=286.44mm is only first step, in subsequent step further flattening is required. in my opinion no alternative to this.

On Fri, 1 Nov 2019 at 11:09, Chiranjeevi A <chiranjeevipuvvula@gmail.com> wrote:

 Dear raghuram, 

    Are you asking the material standard of the pipe it is A333 Gr 6

On Fri, 1 Nov, 2019, 4:34 AM Raghuram Bathula, <raghurambathula@gmail.com> wrote:

what is your product standard? 

On Fri, 1 Nov 2019 at 08:54, Chiranjeevi A <chiranjeevipuvvula@gmail.com> wrote:

Dear All,

We are facing one problem for Flattering test of one LTCS Pipe.

 For Pipe Size 18" x Sch.160 (45.24 mm Thk) – Flattening test result not satisfactory because UTS machine capacity could not achieved the flattening height as per requirement. Obtained Flattening Height – 330 mm (Req. 286.44 mm)  

 

Kindly advice alternative for the following 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADxVubkE47g07FSp6XKZqAeosvTgX%2B_ahwuNY1x5YKGz%3D1tnTA%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAN4%2Bm0z7db%3DvChVQADgp6UVwgJPyL8xb%2BxG3ahADpiDT0gpx3w%40mail.gmail.com.