2017 edition Requires performance testing shall be conducted using an external calibration gas with a known methane concentration. Gasket filler thickness and density shall be determined by the manufacturer such that the performance testing criteria in para. SW-2.6 will be met. Q: Does anybody experienced deviation from gasket manufacturers? which laboratories are equipped with using Methane? Prior to 2017 edition this was not a requirement.
-- https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d245dfe6-3b3f-4e65-a5aa-926b3a75c4da%40googlegroups.com.
No comments:
Post a Comment