Re: [MW:34766] PQR for Piping - NDT Acceptance criteria

Consider ASME SECTION IX or BS EN ISO 15614-1 requirements in your qualification.

Kind Regards

On Tue, Feb 27, 2024 at 2:13 PM 'SENTHILKUMAR SWAMINATHAN' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Hello Dears,

Please give you input when PQR for Piping done - Client spec is silent in NDT Acceptance criteria. Which code Acceptance criteria should use for NDT?

ASME B31.3 or ASME IX.

Thank you, 

Regards, 

S.SENTHILKUMAR

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/750277828.828737.1709031941988%40mail.yahoo.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOnVOrG8kHM0eU0BNsxyiGUCvBBxmBcUYJ6MZtGP3dJYRFvGRw%40mail.gmail.com.