Re: [MW:34762] Re: FILLER WIRE

for single side full penetration welds : 

GTAW/GMAW- ER70S6 /ER 70S2 

SMAW : E7018 OR E7018-1 

FCAW : E70T-1

SAW: EM12K 

Thanks & regards,

Srinivas Rao

On Sunday, February 25, 2024 at 10:47:57 AM UTC+4 Ramamoorthi Thangarasu wrote:

If you want to use different welding process , ER70S & ET70-1,,But need SMAW then you want to conform your parent material tensile strength based on this you can select 6018 or 8018 ......etc

On Fri, Feb 23, 2024 at 11:11 AM Mohd Siraj <mohd...@gmail.com> wrote:

AWS A5.1 E7018 or equivalent.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/5f8647ae-934e-4e2f-9f75-1adaa7e56857n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/68c49c34-9b9a-4d07-b182-c0ac5d82ce42n%40googlegroups.com.