No issue because it is come with impact tested to -45 Deg and your temp is -10 Deg you just tell your client give them code reference as this grade can use upto -45Deg so you can use it no issue in that.
Thanks & Regards
Mr. Rohit Barge
Mr. Rohit Barge
On Fri, 23 Feb 2024, 1:41 pm Mohd Siraj, <mohd52100@gmail.com> wrote:
no, replace the pipe.--On Saturday, December 30, 2023 at 2:40:52 PM UTC+3 dia shukr wrote:Hi friendsI have pipe A333 Gr,6 with design minimum temperature (-10C).Will I need to do a toughness test??As you know, depending on table A-1 in ASME B31.3 the minimum temperature is (-50C).Thanks every one
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/87aef01c-241f-4484-a4ea-7422abf8fb47n%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHK93nLBQfZ_w05Ubu_%2B7h4ztEiD3_3Gybv40S_H4KRdsKXvsg%40mail.gmail.com.
No comments:
Post a Comment