Hi team,
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/3e26c23c-8746-4e43-ac3a-14acc0ff8354n%40googlegroups.com.
Kindly advice the requirement of impact test for Reinforcing pad plate which is welded to the main header. Kindly note that the main header pipe is already impact tested.
Service: Non Sour
Lateral Material: SS316/316L
Lateral Sizes:
60" X 30"
60" X 42" and
60" X 52"
Code: ASME B31.3
Thanks in advance.
-- https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/3e26c23c-8746-4e43-ac3a-14acc0ff8354n%40googlegroups.com.
Comments