Saturday, April 29, 2023

[MW:34163] IGC TEST FOR FILLER WIRE AND ELECTRODE.

Dear all,

How to prepare the test piece for IGC Test for filler wire and electrode...? where is given the detail about test piece preparation detail....

IGC TEST procedure as per  ASTM A262 PRACTICE-E


Thanks and regards
Sujit

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFonYWMnBmkYK9JXu5xvekayhyfXu1OE%2Bg_wmTpfiiu3EeHOOg%40mail.gmail.com.

No comments:

Re: [MW:35737] Bend Test and Tensile Test failed for ET45 Micro Welded Coupon

Hi As its %elongation is very low  Better try buttering on jt surrace with ductile consumable like pure Ni i. E Ni1 And later weld jt with c...