[MW:34146] RE: 34145] Advise for Weld defects during SAW Welding

What's the wire & flux make  being used. Do not provide the AWS grade alone , specify the make also. That's important.

 

Thanks.

 

Pradip Goswami.P.Eng, IWE.

Independent Welding & Metallurgical Engineering Specialist

Consultant: SNC Lavalin Inc. (Nuclear &Non-Nuclear)

Saudi Aramco Approved Designated Project Welding Engineer (DPWR)

Qatar Petroleum Approved, SME-Materials & Corrosion Engineering.

Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/

Email:pgoswami@rogers.com,pradip.goswami@gmail.com

Cell/Whasapp:1-905-9793232

 

From: materials-welding@googlegroups.com <materials-welding@googlegroups.com> On Behalf Of SMM
Sent: April 25, 2023 7:38 AM
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:34145] Advise for Weld defects during SAW Welding

 

Dear Experts, 

 

There are few issues found during SAW weld  cladding at site and are highlighted in the report. Please find attached report.

 

I have a few questions

1. Reason for such issue to occur. 

2. Is the issue of Flux (neutral basic flux) or Flux cored wire used in the process.

3. Please advise how can this be sorted out.

 

Thank you,

George

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c92d0a0d-f589-47eb-8def-01c5e040a3b2n%40googlegroups.com.

Virus-free.www.avg.com