Tuesday, April 25, 2023

[MW:34145] Advise for Weld defects during SAW Welding

Dear Experts, 

There are few issues found during SAW weld  cladding at site and are highlighted in the report. Please find attached report.

I have a few questions
1. Reason for such issue to occur. 
2. Is the issue of Flux (neutral basic flux) or Flux cored wire used in the process.
3. Please advise how can this be sorted out.

Thank you,
George

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c92d0a0d-f589-47eb-8def-01c5e040a3b2n%40googlegroups.com.

No comments:

[MW:35748] Re: PQR- Chemical testing requirements

As answered by everyone, chemical is not required. Notwithstanding, please note that A-No. which denotes weld metal chemical composition is ...