Skip to main content

Re: [MW:32430] RE: Automatic welding machines for Pipeline Welding,

By Materials & Welding
Hi Lakshmanan,

QaPQA (PWT) deals with automatic Pipeline welding. We had a project done using their welding system with pipelines of size 6" to 20" which are of watll thickness 10.49mm to 50.2mm.  Kindly search for "QAPQA" in google. 


On Sun, May 30, 2021, 8:11 PM <pgoswami@rogers.com> wrote:

Hi,

Did you look at this manufacturer's website? Some information is as attached. There may be other manufacturer's also, which may be available through web search.

 

Thanks.

 

Pradip Goswami.P.Eng, IWE.

Independent Consulting Welding & Metallurgical Engineering  Specialist

Saudi Aramco Approved Designated Project  Welding Engineer(DPWR)

Qatar Petroleum Approved, SME-Materials & Corrosion Engineering.

Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/

Email:pgoswami@rogers.com,pradip.goswami@gmail.com

Cell/Whasapp:1-905-9793232

 

 

Welding Machines | crc-evans.com

 

From: Lakshmanan Suresh Kumar <suresh18381@gmail.com>
Sent: May 30, 2021 1:25 AM
To: materials-welding@googlegroups.com
Subject: Automatic welding machines for Pipeline Welding

 

Gentlemen,

 

Can anyone suggest a suitable best quality automated / orbital welding machine for welding Pipeline girth Welds.

Requirements are.....

* Carbon Steel, Sour Service

* both offshore and onshore works

* open root with STT/CMT preferred

 

Thankyou

 

Regards

Suresh 

 

 

 

 

 

 


Virus-free. www.avg.com

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/!%26!AAAAAAAAAAAuAAAAAAAAABVPzeizzeRJsiPziIE5jXQBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAADOFhys9XmHQJlZ06gZev72AQAAAAA%3D%40rogers.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKT-Tupm0LhmZP%3DoeNFiUPrvOP%2B7rqTC8pncmEtQUtXGUva%3DBQ%40mail.gmail.com.

Comments

Post a Comment

Popular posts from this blog

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

[MW:30043] Weep hole

By Materials & Welding
If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .
Post a Comment
Read more

Re: [MW:30021] Re: Difference between Control thickness & nominal material thickness ( Para. 331.1.3(c)

By Materials & Welding
The control thickness (nothing but a governing thickness for PWHT)  is defined in para. 331.1.3 (a) shall be used. On Wed, 4 Sep 2019 at 12:55, atul khatri < atul.mnnit@gmail.com > wrote: No, Exemption on PWHT is based on Nominal thickness not control thickness. On Mon, Sep 2, 2019 at 7:56 PM anhtrangnghieng < anhtrangnghieng@gmail.com > wrote: Dear Gents,  i understand that if control thickness less than 25.4 mm , preheat & PWHT is not required as per Code ?  thank you.  Vào Th 6, 23 thg 8, 2019 vào lúc 15:25 Kannayeram Gnanapandithan < kgpandithan@gmail.com > đã viết: Nominal material Thickness as  Example--- Pressure pipe is supported by another pipe( non pressure part) is being welded, Pressure part pipe thickness is 20mm whereas non pressure part thickness is 10mm,  In this case Nominal material thickness is 20mm. This is my understanding   THANKS & BEST REGARDS, KG.PANDITHAN, BE, IWE,  CSWIP 3.1, ISO 9712 Level 2 in VT, ASNT-Level II in PT,MT,RT & ...
Post a Comment
Read more