Materials & Welding: Re: [MW:32419] Bend Test Jig / Mandrel requirements for Aluminum

Friday, June 4, 2021

Just to add,

I suppose the bend specimen dimension may be as 150mm x 3mm x 10mm

Thanks & Regards

J.Gerald Jayakumar

On Friday, 4 June, 2021, 07:42:07 am IST, 'james gerald' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Dear Mr. Prem,

I suppose the thickness will be 3mm for P23 as per below snap shot.

Thanks & Regards

J.Gerald Jayakumar

On Thursday, 3 June, 2021, 05:26:49 pm IST, Prem Nautiyal <prem.nautiyal26@gmail.com> wrote:

Dear All

We need to conduct Face bend and Root bend test for AA 6061-T6, P.No.23 as per ASME Sec IX.

Thickness of PQR test coupon is 10mm.

We have machined face bend and Root bend specimens with following dimensions - 300mm L × 38mm wide × 10mm Thick.

Can anyone explain what will be the Test jig / Mandrel dia. as per ASME Sec IX , QW 466.1.

For eg. In steels it is 4T.

Regards

Prem Nautiyal

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEP2HKA%3DOBtRN612TD-kaMHXtEyNZB72-g-qVigdXXLa2bWc6A%40mail.gmail.com.

Materials & Welding