After welding, less than 1.5 mm gap is the cause to reject the weld after
RT?
If yes, in accordance which criteria?
Thanks...
Nebi ÖZHAN
e-mail:nozhan@cimtas.com.tr
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
1 comment:
The gap needs to be 1.5mm before welding. The gap is there to prevent stress on the weld or parent material from expansion from heat.
If it is rejectable, i haven't seen the code yet that says so. Although it may be a customer requirement that there is some gap after welding to ensure that undue stress did not happen
Post a Comment