[MW:33165] Acceptance of Excess weld/ hump/ protrution in Weld overlay

Gents,

Could you please advise the acceptance criteria for excess weld / circumferential hump / protrusion in weld overlay of API5LD weld overlay pipes?

Visual inspection criteria addresses under thickness of 0.8 mm only. it does not say about circumferential humps acceptance limit.

Thanks & Regards
Muhammed Ibrahim PK

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALOPgmNCWcKP-OBPEEsbiuTRq0GObbuOJxiiipVt3XAO6rZYcQ%40mail.gmail.com.