Experts
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/bd3a1f1c-6422-4640-985a-d05964ed96d5n%40googlegroups.com.
The dished end is to be fabricated with one number Chordal seam for MOC of
1) SA 387 GR 11 CL2
2)SA 387 GR 22 CL2
One chordal seam in dished end is coming due to plate size( width) limitation and the diameter required of dished end. So butt joint welding is to be done followed by NDT .
Hot forming is planned . After forming is completed, separate Normalizing and tempering Heat treatment is required as per Client specification.
PQR is to be established as per ASME SEC IX .
Pl. suggest suitable consumable and maintain strength
Pl. share experience if any
-- https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/bd3a1f1c-6422-4640-985a-d05964ed96d5n%40googlegroups.com.
Comments