As per ASME Sec. VIII D1, UW8 - (d)
Except when the longitudinal joints are radiographed 4 in. (100 mm) each side of each circumferential welded intersection, vessels made up of two or more courses shall have the centers of the welded longitudinal joints of adjacent courses staggered or separated by a distance of at least five times the thickness of the thicker plate.
Thank you,
Regards,
S.SENTHILKUMAR
On Wednesday, 18 May, 2022, 09:50:25 am IST, krishna magdum <magdumkrishna9@gmail.com> wrote:
Dear team,
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/2bd671f0-a3c8-4cfc-93d6-d7e9599873e0n%40googlegroups.com.
pls suggest how much distance required for two L seam joint in pipe, some of people suggest for 4T
pls suggest for ASME Standard or code
Regards
Krishna
-- https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/2bd671f0-a3c8-4cfc-93d6-d7e9599873e0n%40googlegroups.com.
Comments