Re: [MW:32463] AISI 4145

Hello friends;

Was this query answered?

 I am also encountering a similar problem in welding 4145tube to S355.

we are experiencing a lack of fusion on the 4145 tube side.

Preheat given 150°C

Electrodes tried E7018 and E10018

MTC attached. The tube is Quench tempered.

Any suggestions on this?

Thanks in Advance.

Chris

 

On Monday, August 1, 2011 at 8:40:15 AM UTC+4 Mitesh Patel wrote:

Dear Mubben 

Please Find H/W Attached Doc. Which is help to selection of Welding  consumable ( SMAW & GTAW ) 

Mitesh Patel

Sr, QA/QC Engg

On Fri, Jul 29, 2011 at 10:31 PM, mubeen mubeen <mube...@gmail.com> wrote:

Hi,

Can anybody help me out in order to weld subject base material with appropriate consumables(Electrode or filler wire), along with its preheat and post weld heat treatment temperatures.

Regards,

Mubeen

QA Engineer

--

To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d8a9f9a7-1066-48c9-9b8e-09d0206bf9f3n%40googlegroups.com.