Re: [MW:36139] Re: Automatic welding machines for Pipeline Welding

Programmable orbital GTAW power source, minimum ~300–400 A, pulsed TIG, AVC, oscillation, programmable multi-level sequences, cold-wire feeder, water-cooled orbital heads, data logging, purge-gas control, and interchangeable heads covering approximately 34–324 mm OD.

Regards,

Ashish Ranjan

Save a tree...Please consider your environmental responsibility. Before printing this e-mail message, ask yourself whether you really need a hardcopy.

"Confidentiality Warning: This message and any attachments are intended only for the use of the intended recipient(s), are confidential and may be privileged. If you are not the intended recipient, you are hereby notified that any review, re-transmission, conversion to hard copy, copying, circulation or other use of this message and any attachments is strictly prohibited. If you are not the intended recipient, please notify the sender immediately by return email and delete this message and any attachments from your system.

Virus Warning: Although the company has taken reasonable precautions to ensure no viruses are present in this email. The company cannot accept responsibility for any loss or damage arising from the use of this email or attachment."

Caution: The e-mail below is from an external source. Please do not open attachments or click links unless this email comes from a known sender and you know the content is safe.

On Mon, Jul 27, 2026 at 6:27 PM siril kumar <siril.techi@gmail.com> wrote:

Hello Everyone,

Can you suggest any automatic/ orbita welding machines that is suitable for SS304L/ SS316L from thickness of 2mm to 10mm and Pipes from 25 NB to 300 NB.

Regards,

S Kumar

On Monday, 31 May 2021 at 08:29:25 UTC+5:30 Lakshmanan Suresh Kumar wrote:

Gentlemen,

Can anyone suggest a suitable best quality automated / orbital welding machine for welding Pipeline girth Welds.

Requirements are.....

* Carbon Steel, Sour Service

* both offshore and onshore works

* open root with STT/CMT preferred

Thankyou

Regards

Suresh 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/5a3bf8d7-b258-4a6e-aa65-678704845196n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CA%2BRvhZAGTMwT8hQhvCoO0BiGJQVuhT0DPcnECghX%2BpYJqZ5BDg%40mail.gmail.com.