Re: [MW:35510] ASME SEC IX JOJNT DESIGN

Hi, 

That's basic requirement.

You must add joint sketch.

Regards,

Rakesh

On Sun, 6 Apr, 2025, 07:15 Elavarasan Mech, <elavarasan1861994@gmail.com> wrote:

Dear expert 

As per ASME SEC IX in WPS  joints design sketch is required or not  .our client commented in our WPS need to add sketch (like root gap, root face ,included angel )please guide me 

Regards 

ELAVARASAN 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJ9L4y%3DSdC%2BViuR1doMm4xBi6t%2BKi-3agpW%2BHv-mAOHXB1fMfQ%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAMDG82CuK3k_KGzffiU%2BTcJKGrxKydK3ErMezJbfcimfQY_OhA%40mail.gmail.com.