While welding dissimilar materials, usually lower grade properties shall be acceptable and its a normal industrial practice.
For more information, pease refer your welding specifications of.your project.
Regards
P Govindan
On Thu, Dec 9, 2021, 11:39 AM anhtrangnghieng <anhtrangnghieng@gmail.com> wrote:
Dear Experts,--We have a welded joint: stainless steel type 6Mo UNS S31254 using filler metal ERNiCrMo-3. What would be the chemical requirements criteria ( Cr, Ni, Mo) be for PMI on this joint? Any standard/ code for reference?--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADOyxJi%2BOSmeuJhmc8e-hvB8c8hMHnzXBMAkX8WuJ9tzJhdrnw%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANiuf9d6KtR%3Dy-%2BggtZoFBRrAHxA%2BvmuOz4x5pnsHn%2BMDAQhKQ%40mail.gmail.com.
Comments