Re: [MW:32401] Weld Quality Inspection

0.7 x leg length

On Wednesday, April 14, 2021 at 12:45:05 PM UTC+8 gerry_tup@yahoo.com wrote:

For a Fillet weld, it is based on the Throat size and Leg size and the required profile as convex or concave as Applicable

Thanks & Regards

J.Gerald Jayakumar

On Wednesday, 14 April, 2021, 07:58:49 am IST, Harish Kannepalli <harishka...@gmail.com> wrote:

Hi,

    Please follow ISO 5817 for weld quality levels. However this has to be documented in your or end user SOP.

Regards,
Harish Kumar

On Wed, 14 Apr 2021, 07:55 Amit Singh, <ami...@gmail.com> wrote:

Dear Experts,

What is the acceptable weld bead reinforcement and allowable penetration in the GMAW welding process? Any specific code for structural welding. Please suggest.

Joint design- Fillet Type

Plate thickness- 8mm to 32mm

Material Grade- IS2062 E350C

Thank you in advance.

Regards,

Amit Singh

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKBY_CEcnyT2Z_2Cnu3yFT_LYBhJRwJ%3Dy1Dp2rzq9YLm4PUVow%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAE4SttFQPkMa-a2SoyqS_sGG-BpBumZmVg8Dfx3kZUNYawfRcA%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/27924eff-a3e3-48c5-8695-c38b994f64ccn%40googlegroups.com.