Shwani,
Hydrotest of bellow seal valve is carried out with bellows installed. The manufacturer do the low pressure air testing internally to ensure the welds in bellows are free from any leakage. Then the hydrotest of complete body including bellows will be undertaken. The valve is kept open and the bellows will be subject to external pressure.
When conducting the seat closure test the bellow will not see the pressure.
Best Regards,
Sanjay Gandhi
desaid@toyoindia.com Sent by: materials-welding@googlegroups.com 31/01/2008 12:29 PM
|
|
Dears,
Can any one inform how testing (hydro & pneumatic) of Bellow seal valves are generally carried out? Shell Test & seat test both.
i.e. with bellows or without bellows?
If there is some detailed procedure available of reputed vendor then pls. send.
Thanks & Regards,
Dhwani Desai.
======================================================= Confidentiality Notice This communication and the information it contains:- (a) Is intended for the person(s) or organisation(s) named above and for no other person(s) or organisation(s). (b) May be confidential, legally privileged and protected in law. Unauthorised use, copying or disclosure of any of it may be unlawful. If you have received this communication in error, please contact us immediately by email at Postmaster@fwuk.fwc.com. =======================================================--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
-~----------~----~----~----~------~----~------~--~---
No comments:
Post a Comment